Rosetta Stallcup

Car Key Repair - How to Fix a Dead remote car key repair (published on King Wifi)

Car remotes are a great convenience for drivers. They can unlock doors, open trunks and even start the car. These remotes can stop working at the most inconvenient of moments.

If you discover that your key fob is not working, you can try a few quick fixes before going to the dealer. These suggestions could save you money.

Keyless Entry System

Instead of fumbling around with keys in your purse or pocket instead, walk to your car, press an icon on the key fob, and then open the doors and start the engine. It's an easy feature that makes driving a car more relaxing and safe. The keyless entry system, as any other device, could be damaged through repeated use or other elements. If you have problems with yours, you may either visit the dealer or phone an locksmith.

The way that a keyless entry system operates is by sending radio signals and then searching for a response signal from the key fob. If the system detects the signal, the car's doors are opened and the computer on board is activated. Some systems have a second receiver on the trunk of the car that opens automatically when you move your foot underneath it.

Each key fob is given a unique digital identification code by the manufacturer. The fob is programmed by a proprietary process called "programming". This involves turning on the ignition of the vehicle repeatedly in a certain sequence. It may also require pushing or pulling buttons or levers, or even removing the fuse.

Once a key fob is programmed to your specific vehicle's keyless entry system it transmits its digital identification code as well as a function code that tells the car what to do (lock or unlock the trunk or open the trunk). The receiver in the car verifies that the transmitter is who it claims to be through an authentication and encryption procedure. If it is authorized, the onboard computer unlocks the vehicle and begins the engine.

There are concerns that a clever criminal could intercept the code that's transmitted between the key fob repair fob and the car. This would require a special device to record the transmission then retransmit it later when the system isn't expecting it. To combat this issue, the majority of keyless entry systems use a method called rolling code, which ensures that each new signal from the transmitter received by the vehicle has a different counter value than the previous one.

Batteries

The most frequent reason for the car remote key fob not working is a dead battery. If you have an extra key fob it's a low-cost and simple fix. Luckily, most fobs use traditional watch-style batteries which are sold at hardware stores or big-box retailers for less than $10. A quick search on the internet or in your vehicle's owner's manual should give you instructions on how to disassemble your mobile key fob repair fob and swap out the battery.

After you've removed your battery, make sure not to damage any antennas or circuits within the case. If you do this the key fob will become unprogrammable and will not function. If you must move them, do it with care, as some key fobs have fasteners that can easily pop open and scatter key fob parts throughout your living space.

Most key fobs come with one hole that allows the screwdriver or another pry tool to open the case, however it's a good idea to put your tool on the outside of the case first, as if you were peeling an orange or apple. Don't apply too much pressure, as the case of the key fob is typically made of plastic and may break or crack if apply too much pressure to it.

Be sure to match the size and type of the battery to the key fob when you replace it. Some key fobs have two batteries, while others only require one. A bad battery could make your remote key fob useless.

If the problem persists then you can try it again with your key fob after installing the new battery. If this fails then you'll be required to determine if your fob is suffering from an issue that is more complicated and requires professional diagnosis. It could be necessary to have your key fob reprogrammed by the dealer or purchase a new one.

Buttons

The buttons on your key fob are pretty tiny, and filled with delicate electronics. It's not a surprise that they occasionally fail. If your car key button suddenly ceases to function, you can usually fix it yourself.

The most frequent reason why the car remote stops functioning is due to dirt or crud has been stuck between the buttons. To get rid of this issue, take off the batteries carefully and scrub each button with an abrasive that has been dipped into ruby alcohol. Make sure you dry them completely before reinstalling batteries.

It's possible that the key fob has been damaged somehow, perhaps dropped on concrete or accidentally scratched by a sharp object. If this is the scenario, you can test your key fob's functionality by using a different one.

The door lock sensor could have stopped working in your car. It's a tiny, metal part that's connected to the door lock button on your key fob and it's not common for this sensor to break during long use or exposure to extreme weather conditions. Press your key button a few times without locking or unlocking your doors. This will reset the sensor.

If all else fails, you can always test the function of a spare key by unlocking and locking your doors with it. If the spare key does not work, it may be necessary to locate an 24 hour locksmith that can offer car key repair car key fob to make your remote work again.

If the car key lock repair near me key button is working but still not locking or unlocking the vehicle, try to re-programme your computer system. Be aware that if you've had the same key fob for some time, it's going to need to be programmed each few months to ensure that it continues to work properly with your vehicle. It's not the most ideal solution, but it's better than buying a new remote.