Edgar Copeley

Making Your Own Replacement Key For Saab 93 Viggen

Saab owners who lost their key to their car could be concerned about the expense and hassle of getting another one. There is a way to cut down on the cost by creating your own key fob.

You will need a flathead phillips screwdriver to accomplish this. Put the screwdriver into the slot located in the middle of the case and slowly work it open.

Cost

The majority of SAABs have two keys when they are new, however some used cars only have one. In this case, the owner must get a new key, and this could be costly. There are a number of ways to save on this process. For instance, if only require a replacement for your key fob case and you want to save money by purchasing a used case at the dealership. But, be aware that these cases do not include the emergency key or badge and are susceptible to wearing out very quickly.

You must also be able to pay for the installation and programming the TWICE module. These expenses can quickly increase particularly if there is no spare key.

It is crucial to always have two keys for your vehicle. If you lose only one key, you will not be stranded with no transportation.

It's not as hard as it might seem to add an additional saab 9-3 key programming 9-3 key. The only problem is that you must pair the key with the car's computers. This can be accomplished by a dealer, however it may take some time to schedule an appointment. Fortunately, you can find the information you need online to assist you with the procedure.

Installation

Most Saab vehicles manufactured after 1995 have an immobilizer system which uses a key fob to control the engine. The system also controls door locks and remote functions of the car. It is vital to have a spare key to avoid losing the original one and having your car stolen. The good news is that in the event you lose your only functioning Saab key there are ways to replace it without having to pay for an expensive dealer service.

It is necessary to prepare the new keyfob. It is done by using the flathead screwdriver for prying the case open. Simply insert the screwdriver into a small hole in the middle of the case and gently work it. If you're having trouble, try using different angles. Once you've opened up the case, you can remove the electronics and place them in a new fob case.

You can begin the programming process when you have the replacement key and fob. You'll need to connect your Tech2 to the computer and follow the instructions for NG 9-3 with or without the transponder. It is recommended to use a replacement saab 9-3 key unit that is coupled to the correct key and transponder. You can find the unit online, but you should make sure that the replacement is an OEM part.

Programming

In general, adding an additional key for Saab 9-3 requires an instrument called a Tech 2. It also requires programming the vehicle to recognize the new key. This is a much more complex process than simply copying a key made of metal. It should be handled by a professional in order to not harm the electronic system of the vehicle. It is best to get a spare car key as soon as you can. In the event of delay, it could result in higher costs in the future.

You'll also need to replace either the TWICE or CIM modules. This is typically a mail-order procedure and isn't something you can do with an aftermarket provider. The cost of a new car can be very high, depending on the car model.

The dealer will charge you the most dollar for replacing the car computer, but there's a different option! S.A. Locksmith & Security can RE-Program the EEPROM in your Saab computer and prepare the vehicle for the new key, saving you the cost of a brand new car computer! This service is fast and inexpensive, and it is simple. You could save up to 50% on the amount the dealer would charge. This is a fantastic solution for those who have lost their keys.

Remotes

The Saab 9-3 Viggen was one of the most distinctive cars that ever wore the saab 9-3 key fob programming badge. It was a Scandinavian, front-drive fighter jet-inspired beast that was fast as a nut and fun to drive. Many other Saab models were released, but none were as unique.

If you own a saab replacement keys 9-3 and lose the key fob, it's important to replace it as quickly as you can. Saab vehicles have an immobilizer system that requires a key that is unique for starting. The process of replacing the key is straightforward if you have a spare key, however it can be expensive and time-consuming if you don't have an extra.

You can save money by purchasing a used replacement key fob and then having it programmed by a locksmith local to you. You should be cautious when buying used keys on eBay and other online stores. They might not be genuine and you may end up paying more in the end.

The removal of the battery and electronic components from the old key fob is an easy procedure that anyone can complete with a small flathead screwdriver. Be careful not to damage the small electronic components in the case. Be careful not to pour liquids into the case since this could cause damage. Also, avoid buying cloned keys through aftermarket sellers, since they might not have been paired with the CIM of your car.