Edgar Copeley

How To Program Saab 9-3 Key Fob - Ai-Db.Science - to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct set of steps to add another key. This requires an electronic handheld computer, referred to as Tech-2, to be used by the dealer. Then a new key and transponder must be purchased and programmed to the car.

Make sure to rotate your keys in order to prevent one from wearing out faster than the next. This will keep your keys in pristine condition.

Replacement Case

The new key fobs do not look like the old Saab keys. They are equipped with electronics that make them difficult to copy. This has made theft of cars much more difficult than it was just a few years ago. However, it has also made the replacement of lost keys an incredibly costly endeavor.

Every owner of a Saab 9-3 should have at minimum two working keys. If one is lost it is expensive to purchase a new one for the car because it involves replacing the CIM module, and then reprogramming the locking cylinders. Dealers will typically charge $100-$200 to complete this.

There are ways to avoid these costs. Some parts dealers will use the code of a spare key to cut a new metal blade for less than what the dealer charges. The key must be the exact same as the original for it to function in your vehicle.

You can also change the case yourself by following these steps. You'll require a flathead screwdriver along with some patience. With the screwdriver, slowly pry the plastic apart and separate the emergency key from the case. Once the case is open, take the electronics out and put them back into the new case. Place the key with the correct badge inside the case.

Replacement Battery

The Saab 9-3 replacement battery is an inexpensive part that can be easily and quickly replaced. This video tutorial on DIY from YouTube Cyclone Cyd, a user on YouTube, explains how to replace the battery of the remote key fob in just four steps. This tutorial can be used with any modern saab key fob repair key fob. However, the process might differ slightly.

The first step is to locate the button that will release the backup key in the fob. It is usually located near the saab spare key logo on the back of the fob. Next use a flathead screwdriver to insert into the small hole in this button. This should be enough to allow you to open the fob case in order to change the battery.

After the new battery CR1632 is in place then you can reassemble your remote key fob and program it to your car. The entire process should not take more than an hour. This is a straightforward process that doesn't require any special tools.

If you lose your key, the process will be more complicated however it can be accomplished. The dealer has to verify the VIN of the car, and then purchase a replacement key blade and TWICE module that has the exact unique code. The dealer will then have to program the key using MDI which is a new software tool.

Replacement Key Fob

The key fob is the device that locks and unlocks your car, it's got a battery inside. The batteries have a lifespan and will eventually fail. This is a typical issue that affects all cars and the good thing is that you can replace the batteries in a majority of key fobs without replacing the whole case. Amazon sells replacement fobs that already have all the electronics in place. You can simply open the case and replace the batteries. You'll need to take out the emergency key before you can replace the batteries. To do this, place a small screwdriver that is flat into the slot in the middle of the. The case should split when you turn the screwdriver around it.

When you are ready to replace your keys, ensure you have spare keys, since this will cut down the total cost by a substantial amount. If you have an extra key, you can request the dealer to cut it and program it for your car. This is less expensive than buying a new key fob.

If you do not have a spare key car key, you can add an additional key to your car, however this requires a lot of research and effort. It costs a few hundred dollars to get an additional car key. The computer in the vehicle also has to be programmed. This can be done by a professional, however it's an expensive option for most owners.

replacement saab key Ignition

Contrary to earlier Saab cars, the modern SAAB 9-3 models feature an advanced alarm system that is dependent on a coded keys. If you lose your primary key, it could be costly to replace it with another one, as the car has to have a special computer added and be programmed to accept a brand new key. The majority of locksmiths aren't able to do this and dealers can charge several hundred dollars just to program the new key!

Dealers will charge you a premium to replace your car computer (also known as the CIM or saab 9-3 key replacement twice) If you lose your only working key. Instead we can reprogram the EEPROM of your current car computer to allow it to be programmed for an additional key, and save you over 50% of what you'd pay at a dealership.

If you've been a long time owner of a 03-11 saab replacement key programming 9-3, you probably realize that the ignition key isn't very durable. If your ignition key isn't functioning properly, it is time to consider replacing it. They can become sticky and the buttons have been known to fall off. Luckily, replacing the ignition key isn't as complicated as it seems and can be done quickly using the appropriate tools.