Mackenzie Dehaven

BMW Ghost Immobiliser

The Ghost utilizes the CAN data bus for communication with your vehicle. This prevents thieves from replacing the ECU or putting in new locks to bypass the security system.

The Ghost is different from other immobilisers as it doesn't rely on key-fobs or LED indicators. It makes use of the buttons on your vehicle to let you enter a unique disarming sequence that you only know.

Stop & Start

If you've ever driven a BMW or utilized its stop-start feature, you might have noticed that the engine continues to run for about 30 seconds after you release the brake pedal. This is due to the BMW engine management system continuing to monitor your vehicle for signals from the ignition key, and when this signal is detected, it will continue to run. The autowatch ghost immobiliser cost 2 Ghost is a device that stops this by stopping the vehicle when you hit a button.

Our BMW ghost immobiliser, a next-generation device, doesn't require cutting OEM wires or install aftermarket alarms and key fobs. It is hooked up to the BMW's CAN data network and is programmed with a secure, unique PIN code that can be accessed using buttons installed in your car. This allows you to enter a specific key push sequence that isn't available in the usual menus for media, such as volume up/down, cruise control, source or aircon on that prevents your car from starting until the sequence is entered. The PIN can be between 4 and 20 characters, making it hard for thieves to figure out.

We can also include the ability to use a service/valet feature. This mode is activated when your vehicle is being serviced to ensure that the Ghost is kept from view by the garage. This can be accomplished by pressing the service button on your infotainment system 5 times (the system will flash to confirm this) and when you return the Ghost will automatically re-arm.

Ghost immobilisers are highly recommended for top-of-the-line automobiles. It's completely undetectable and doesn't require cutting any original factory wiring and can disable your car's engine if an incorrect pin code is entered. It's a simple but effective way to prevent your car from being stolen - even with cloned key. Take a look at social media accounts to see how quickly new vehicles can be stolen by using tools for cloning that are available online for less than PS80.

Service Mode / Valet Mode

The Ghost is the most popular immobiliser on the market. It protects your vehicle from being stolen through key cloning or hacking. It uses the factory buttons on your vehicle to create a unique sequence of pushes that only you can identify. This is similar to the pin code security of your mobile phone. It's subtle, extremely effective and can deter even the most obstinate thieves!

When parked at your home or in a meet and greet in a meeting and greet situation, the ghost 2 immobiliser problems can be set to service mode. This lets you start the vehicle using your keys but prevents the engine from starting until the correct code is entered. This is a great option for those who have to hand their cars to valet companies or other trusted friends and family members. This allows you to take your car to the garage for servicing and maintenance, etc. without fearing that it might be modified by mechanics while you are waiting.

When the service/valet mode is activated, your BMW will not be able to drive after it has been turned on. This prevents anyone else from attempting to drive it while you're away. When you return, it will revert back to normal driving, stopping your car from being tampered with or stolen again.

The Ghost can be fitted to any BMW. All you require are the correct keys, because the device does not utilize the original remotes, but can be used in conjunction with them. We are TASSA-registered, DBS-security checked and fully certified in system installation. You can be sure that the installation will go correctly and your Ghost device will work as intended. Your vehicle will also be registered in a database and you will receive documentation that you can provide to your insurance company. they are awestruck by these devices and often see substantial discounts as a result!

If you don't wish to use a smartphone, or don't feel comfortable with it, we can supply an optional Bluetooth tag that can be used to turn off the ghost immobiliser tracker. This is an additional cost and requires a new Bluetooth pairing.

Anti-Hijack

With high-tech thieves becoming more and more sophisticated the security technology is continuing to improve, which is why autowatch ghost immobiliser cost has developed this discreet and non-obtrusive immobiliser. It's designed to stop thieves from using a brand new key or replacing the ECU to start your vehicle and then drive away. Ghost is connected to your CAN network and utilizes buttons on your vehicle to generate a unique push-sequence that must be entered before the engine can begin.

If the anti-hijacking mode has been activated, any attempt to restart the engine will be thwarted. The system will honk the horn flashing the indicators, and stop the vehicle when the code isn't found. The Anti-Hijack feature is removed by entering your push sequence or by entering service mode which allows your vehicle to start and drive without having to enter your PIN.

If you have an GPS device that is connected to your BMW it could be used to disable the Anti-Hijack feature so you can still use the navigation system inside your car when the vehicle is parked unsupervised. If you have a smart-phone you can also connect it to your ghost Immobiliser car app to control the anti-hijack function and other functions.

This product is Tassa-certified and is recognized by a majority of insurance companies. It reduces the chance of your pride and Joy being stolen. It is completely invisible and won't interfere with the functionality of your vehicle. It does not require any programming expertise to install or use. It is completely undetectable to the tools used by thieves to detect the device and is invulnerable to key cloning because it is connected to the vehicle's CAN data network.

Remote Control

We can connect the Ghost device to your mobile app to enable remote control of keyless start and go capabilities. This is useful when you need to be somewhere other than home and valet or mechanic need to start your car. The system allows you to turn your vehicle on and off, then select drive and quit service mode without needing your key fobs. You can also track your vehicle on the map in real-time using your smartphone.

The Ghost can be positioned under the dashboard or inside the center console. It is completely hidden and tamperproof and doesn't require any additional wiring. The device is connected to CAN Data Network of the vehicle (similar to an Ethernet cable) and a unique pin code is programmed in it. The pin code must be entered prior to the engine's start. This will prevent thieves from gaining access to the system with the cloned or replaced ECU.

If the vehicle is being stolen, the Ghost will enter service mode and shut down all functions until you have the PIN number or use the mobile application to disable it. This feature was developed to protect your vehicle from thieves using high-tech devices who use relay boxes to steal it. It also prevents thieves from using their mobile phone to activate your sat nav or mp3 player to locate your car!

Ghost can also stop the 'Relay-style Frequency amplification'. This is the most typical method of preventing a vehicle from being taken away with a key-fob that has been copied or stolen through hacking. ghost ii immobiliser allows you to stop this by installing an anti-theft device in your vehicle, called Secure-A-Key. The device is installed inside your vehicle's key-fob and removes the battery after a short period of inactivity, this can be done on most modern PKE key-fobs.

We are TASSA (Tracking And Aftermarket Security Systems Association) accredited, a recognized body that some insurance companies recognize and provide discounts for installing the device. We are also DBS security checked and fully system trained to install the Ghost, ensuring that all work is done to the highest standard. You will receive a certificate that you can take to your insurance company to prove the installation. This will enable you to get the best price on your car cover.