Mackenzie Dehaven

ghost 2 immobiliser cost 2 Immobiliser

Ghost 2 Immobiliser review is a wireless security system that guards your car against key cloning and hacking. It connects to the ECU unit through the CAN data networks. It's silent, meaning it cannot be detected.

It is only disarmed by entering a specific button sequence (like a PIN code) that you've programmed using the buttons in your vehicle - like those on the steering wheel or center console.

Protect Your Car from Theft

Car theft is on the rise and cars are stolen in a matter of minutes. It is important that car owners think about the extra security measures they can employ. Immobilisers are one of the most effective and most dependable methods of keeping your vehicle safe. Ghost immobilisers can be an excellent option since they are small and concealed within the vehicle's wires. They also do not emit radio frequency signals. This means that they are not traceable and can be installed without affecting your vehicle's CAN bus.

Our ghost immobiliser in your area can only be disarmed with the pin code that we installed at the time of installation. This unique disarming sequence utilizes buttons on your steering wheel, doors or centre consoles to prevent anyone from driving away your vehicle. This makes it impossible for thieves to clone your key or use jamming/spoofing devices that could disable normal immobilisers.

A ghost immobiliser won't just stop your car from being driven, but also from being stripped down to make parts. This is a growing issue in the UK because of the popularity of these kinds of cars. It can happen in a minute. TTW ghost immobilisers can be easily programmed to shield vehicles from such attacks.

When you have our ghost 2 immobiliser near me installed it will stop your car being stolen from the service station or when it is being driven by an employee while your vehicle is on the lift at the garage. The Ghost can be set to Service/Valet Mode, which allows you, the consumer, to enter a unique button combination.

Contact us today if are interested in learning more about our Ghost immobilisers, or if you'd like a no-cost quote. We're here to help you and give you peace of mind knowing that your vehicle will be safe for all times.

No Key Fobs or LED Indications To Give Away Its Location

Protect your vehicle from the latest type of theft by using this non-detectable immobiliser that integrates into your car's CAN data network. In contrast to other CAN immobilisers that are sold by aftermarket, Ghost does not rely on key fobs or LED indicators to function instead it uses buttons in the standard factory controls already in your vehicle, such as the ones on the steering wheel, door panels, and the centre console. This creates a code that has to be entered to begin the operation of your vehicle, which makes it impossible for thieves to locate.

The CAN-BUS device developers have also included additional security measures to stop the device from being hacked, or bypassed. It also provides CAN-BUS blockage and an immobiliser cut that is physical, meaning that even if your keys get stolen, the burglar cannot take off with your pride and joy.

Installing the CAN-BUS into your vehicle is a simple and easy procedure that only takes 30 minutes. We will have someone from our team in your area to set up a time and location that is convenient for your needs. Once your vehicle has been fitted, you will be given an identification code and security codes that you can use on your smartphone and application. This will make it easier for you to use and gives you complete control over the safety of your vehicle.

The system is compatible with a wide range of modern vehicles, however should you own a vintage or specialized vehicle we recommend you contact us to check compatibility. The supply and installation price of The ghost immobiliser car Immobiliser is APS449 and your vehicle will be added to the International Security Register if fitted by one of our approved fitters. Don't hesitate to reach out to our helpful team with any queries. We're looking forward to hearing from you.

Easy to Setup and Programming

Modern cars are usually fitted with immobilisers that stop thieves from hot-wiring or taking your car. Unlike physical deterrents like steering wheel locks or wheel clamps, an immobiliser is concealed within your vehicle making it nearly impossible to locate and defeat.

The system works by connecting directly to the CAN data network of your vehicle and prevents your vehicle from starting unless you input a unique personalised code. The unit is sealed and so small it can be placed virtually anywhere in your vehicle without the need for wiring. It doesn't emit radio frequency signals, which means it can't be detected by RF scanning or code grabbing equipment used by thieves.

Ghost uses the buttons on your steering wheel, door panels, and the centre console of your vehicle to generate a customisable (like a pin code) disarm sequence that has to be entered in order to start your vehicle. The pin code sequence can be altered depending on the need and is dependent on four to twenty button presses. You can also put the vehicle in Service/Valet Mode to ensure that it is still operable but will not start or drive. This will ensure that your vehicle is safe when you bring it in for service or valet parking, and that the mechanic cannot access your pin code to turn off your system.

You can make use of our app to create temporary pins for your ghost device if you're planning to be away from your vehicle for an extended period of time like a holiday or work trip. You can enter your pin manually when you drive the vehicle.

Our CAN bus immobiliser can also be connected to an electronic remote key fob or tracker (Brand dependent) which will have priority over the ghost system. This is a great option for additional security in the case your vehicle is stolen or if you lose your keys.

Contact us today to learn how we can protect your vehicle from key cloning and hacking. We offer our services throughout the UK and also at our installation center in Derby.

Service/Valet mode

Modern cars have sophisticated eco systems with stop/start that require the right inputs to function effectively. For example, battery voltage and temperatures of the engine, as well as external temperatures and the electrical systems that are in use. Sometimes these can cause problems and are often difficult to determine if the issue is Ghost related or not. This is especially true when the vehicle has been recently serviced or valet parked. You can use the ghost service mode that allows the vehicle to start and drive for a short period without the need for a pin code. This can be helpful when your car is being serviced or valet parking at an independent garage.

Press the button for service five times to enter service mode. The indicator will flash twice when service mode is selected. This can be canceled at any time by entering a pin code. Once you have exited service mode the Ghost immobiliser will return to normal operation.

This is a very discrete system that communicates with the vehicle ECU through the CAN data circuit. It is directly connected to the original buttons of the vehicle and does not employ radio frequency signals like other immobilisers. This makes it virtually impossible for any other device to hack or bypass or jam devices that spoof codes from an original key fob do not affect this system.

It is a TASSA-certified anti-theft device that meets the most stringent standards for protection. It has a unique marking system that is linked to the security registry of the world, which is required by insurance companies.

The ghost immobiliser is a tiny device that can be easily hidden within your vehicle's factory wiring. This makes it virtually impossible for thieves. The sealed unit is so small that it can be mounted in various places of the car, such as under dashboards or on steering wheels.

The system uses existing buttons in your vehicle such as those found on the steering wheel, door panels or centre console to allow you to create a unique and changing disarm sequence of up to 20 presses that must be completed to start your vehicle. Anyone with your unique pin code can use it - meaning you, your family members, your colleagues or friends can use it.