Edgar Copeley

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique procedure to add an additional key. It requires dealer service using a handheld computer called Tech-2. A new key and transponder are required to be purchased and programmed to the car.

It is an excellent idea to rotate your keys in order that one doesn't get damaged faster than the other. This will help to keep your keys in pristine condition.

Replacement Case

Unlike the classic Saab keys of old keys, the modern keys have electronic components which makes it difficult to make a copy. That has made car theft significantly more difficult than it was twenty years ago. It has also made it more expensive to replace lost keys.

saab key programmer 9-3 owners must have two keys working. If one of them is lost saab keys, it is expensive to add another to the car because it involves replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100-$200 to do this.

There are ways to reduce the high price. Some parts providers will use the code of a spare key to cut a brand new metal blade for a fraction of that of a dealer. The key must be exactly the same as the original for it to work in your vehicle.

Follow these steps to replace the case. You will need to have a flathead and a lot of patience. With the screwdriver you can pull off the plastic and then remove the emergency key. Once the case has been opened take the electronics out and put them back in your new case. Make sure to insert the correct badge and key back into the case as well.

Replacement Battery

The replacement battery for the Saab 9-3 is an affordable component that can be replaced easily and quickly. Cyclone's YouTube video Cyd shows how to replace the remote fob battery with just four easy steps. This tutorial should work with any modern Saab key fob. However, the process could differ slightly.

This button is usually located just below the Saab logo on the back of the fob. It is usually located near the saab key battery logo on the back of the fob. Then use a flathead screwdriver to insert into the tiny hole in this button. This should be enough to open the case of the fob to allow you to replace the battery.

After the new battery CR1632 is in place then you can reassemble your remote key fob and then program it to your car. The whole process should take more than an hour at most. It is a very simple process that does not require any special equipment.

If you lose your key, the procedure will be a bit more involved however it can be completed. The dealer will first need to read the VIN of the vehicle, and then purchase an additional TWICE module and key blade that has the correct unique code. The dealer will then have to program the key using MDI, a brand new software tool.

Key Replacement Fob

The key fob is a device that locks and unlocks your car. It is equipped with a battery within. They have a limited life span and eventually will die. This is a typical issue that happens with all cars and the good thing is that you can change the batteries in a majority of key fobs without replacing the whole case. You can buy replacement fobs from Amazon that have all the electronics already installed, so you'll be able to just pop open the case and replace those batteries that are old. It is important to remember that you'll need to take out the emergency key first, and you can do this by inserting the small screwdriver flathead into the slot located in the middle of the case. The screwdriver should be moved around the case, and it should split open, making it easier to remove.

If you're about to replace the keys ensure that you have a spare, as this can reduce the total cost by a significant amount. If you have an additional key, you can request the dealer to cut it in half and program it to your vehicle. This is much cheaper than buying a new key fob.

It is possible to add another key to your car if you don't already have one, but it requires lots of research and work. A second key can cost about a few hundred dollars and it also requires programming of the car's computer. Professionals can accomplish this however, it's a costly option.

Replacement Ignition

Unlike the earlier saab 9 3 key replacement vehicles, the latest SAAB 9-3 models have an extremely sophisticated alarm system that is built around a coded key. If you lose your only key, it may be costly to replace it with another one since the car needs to have a specific computer installed and also be programmed to accept a new key. Even dealers can charge hundreds of dollars to program an entirely new key, in the event that they are unable to do it.

If you've lost your sole working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) to create the replacement, and will charge you a premium price for it. We can reprogram the current EEPROM of your car's computer to be ready for an extra key. This will save you more than 50% off what you would spend at the dealer.

If you have owned a 9-3 from saab 9-3 key replacement - https://intern.ee.aeust.edu.tw/home.php?mod=space&uid=222614 - for many years you are aware that the ignition keys are not very durable. They can get extremely sticky, and the buttons can be removed from them from time to time which is why you should think about replacing your ignition key if it isn't working as it should. The good news is that replacing the ignition key isn't as difficult as it seems and can be done in a short time with the right tools.