Mackenzie Dehaven

Ghost 2 Immobiliser

Ghost is an electronic security system that wirelessly safeguards your car from key-cloning and hacking. It connects to the ECU unit through the CAN data network and is silent and isn't identified by thieves.

It can only be deactivated by pressing a specific button sequence (like PIN code) that you've programmed using the buttons in your car - such as those on the steering wheel or centre console.

Protects Your Car From Theft

Car theft is on the rise and cars are taken in a matter of minutes. It is essential that car owners take into consideration the additional security measures they can employ. Immobilisers are one of the best and most well-established methods to ensure your vehicle's security. ghost 11 immobiliser immobilisers are a great choice as they are small and concealed in the wires of your vehicle. They also do not emit radio frequency signals. This means that they are untraceable and can be fitted without affecting your vehicles CAN bus system.

In contrast to other immobilisers that depend on keypad input, tags or a specific sequence of keys to disable them the ghost immobiliser that is located near me can only be deactivated by the pin code set up by us at the time of installation. This unique disarm sequence utilizes the buttons already present in your vehicle such as those on the steering wheel, doors, or the centre console to prevent anyone from starting their engine and driving your car away. This makes it impossible for thieves to copy your key or use jamming/spoofing equipment that could disable the standard immobilisers.

A ghost immobiliser will not just stop your car from being driven but also stops it from being smashed to make parts. This is a growing problem in the UK due to the increased popularity of these type of vehicles and can occur in as little as an hour. TTW ghost immobilisers are easily programmed to guard vehicles from such attacks.

Installing our Ghost 2 immobiliser can stop your car from being taken at a service station, or even if it is driven into the garage by employees. The Ghost can be set to Service/Valet Mode, which allows you, the consumer to use a specific button combination.

Contact us today if you would like to learn more about our Ghost immobilisers or if you would like a no-cost quote. We're happy to assist you and provide peace of mind knowing that your vehicle will be safe throughout the day.

There isn't a key fob or LED to reveal its location

Make sure your vehicle is protected from the newest type of theft by using this non-detectable immobiliser that integrates into your car's CAN data network. Ghost is different from other CAN-immobilisers made by aftermarket vendors that depend on key fobs or LED indicators to perform the function. Instead, it makes use of the buttons that are on your vehicle's standard factory controls, like those on the steering wheel and doors. This means a hidden pin code is created that must be entered before the vehicle can start which makes it totally undetectable to thieves.

The CAN-BUS immobiliser's developers have also added additional security methods to guard the device from being hacked or bypassed. It also offers CAN-BUS blocking and an immobiliser cut that is physical, meaning that even if your keys get stolen, the burglar cannot drive away with your joy and pride.

It's a simple process to have the CAN-BUS immobiliser installed in your vehicle and it is only about 30 minutes. We will send someone from our team in your area to schedule the time and place that is convenient for you. Once your vehicle has been fitted, you will be given an registration code as well as unique security codes to use on your smartphone and application. This makes it easier to use and gives you complete control over the safety of your vehicle.

The system is available on most modern vehicles but should you own a special or vintage car please get in touch to find out if it's compatible. The Ghost Immobiliser 2, with installation included, costs APS449 and your vehicle will also be added to the International Security Register if installed by one of our approved installers. Don't be afraid to contact our helpful team with any questions. We're looking forward getting in touch with you soon.

Easy to set up and program.

Modern vehicles are often fitted with immobilisers to prevent thieves from stealing or hot-wiring your vehicle. Unlike physical deterrents like steering wheel locks or wheel clamps, an immobiliser is hidden within your vehicle making it virtually impossible to locate and defeat.

The unit connects directly to the CAN data network of your vehicle and prevents it from running until you enter a unique code. The unit is completely sealed and so small that it can be installed virtually anywhere in your vehicle without the need for wiring. It also doesn't emit any radio frequency signals therefore it isn't detected by RF scanners or code grabbing devices used by thieves.

Ghost makes use of the buttons on your steering wheel, door panels and centre console of your car to create a customisable (like pin code) disarm sequence which must be entered to start your car. The pin code sequence can be modified if needed and is based on four to twenty button presses. You can even put the vehicle in Service/Valet Mode so that it is still operable but it will not start or drive. This will keep your car safe when you take it in for service or valet parking. Also, make sure that the mechanic isn't able to access your pin code in order to deactivate your system.

If you're away from your vehicle for a prolonged period like an excursion or business trip, you can use our app to obtain a temporary pin. You can manually enter your pin while driving the vehicle.

Our CAN bus immobiliser is compatible with a remote keyfob and tracker. (Brand dependent) This will give priority to the ghost system. This can provide additional security if your vehicle is stolen or if your keys are lost.

If you're looking for a way to safeguard your vehicle from key-cloning or hacking, contact us today to discuss how we can assist. We offer our services throughout the UK, as well as in our own installation centre in Derby.

Service/Valet mode

Modern cars are equipped with sophisticated eco systems with stop/start that require the right inputs for them to work correctly. For instance batteries, voltages as well as engine temperatures, external temperatures and which electrical systems are active. Sometimes these can cause problems and can often be difficult to diagnose if it is Ghost related or not. This is especially true if your vehicle has been recently repaired or valet-parked. If this is the case, you can switch to the ghost immobiliser problems service mode, which allows the vehicle to be driven and start up without the need for a pin code. This is useful when your vehicle is being inspected or at an independent garage.

Press the button for service five times to enter service mode. The indicator will flash twice when the service mode is selected. You can exit this mode at any time using a PIN code. After you have gotten out of service mode the Ghost 2 immobiliser Review immobiliser will resume normal operation.

This is a very discrete system that communicates with the vehicle ECU via the CAN data circuit. It connects directly to the original buttons of the vehicle and does not employ radio frequency signals, like other immobilisers. This makes it nearly impossible for any other device to hack or bypass or even jamming devices that use spoof codes to mimic the original key fob will do not affect this system.

It is a TASSA certified anti-theft system that meets the highest protection standards. It has a unique marking system that is linked to the security registry of the world, which is a requirement for insurance companies.

The ghost immobiliser is a small device that is easily hidden in the wiring of your vehicle's factory. This makes it nearly impossible for thieves to steal. It is a sealed unit that is so small it can be placed in different locations of the vehicle, including under the dashboard or on the steering wheel.

The system utilizes the buttons already present in your vehicle (such as the ones on your steering wheel or door panels, or on your center console) to enable you to create an individual and programmable disarm sequence of up to 20 press long. It must be completed before your vehicle can start. It is able to be entered by anyone with your pin code - it is safe and secure for you and your family members, colleagues, or friends to use.