Blog entry by Lavern Holeman

Anyone in the world

Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to protect cars from hacking or key cloning, is a small device that can be installed without damaging your vehicle. It prevents you from starting your vehicle unless you press the correct sequence of keys in your vehicle. It is similar to a mobile password.

Stop/Start

Ghost Immobilisers stop vehicles being stolen by stopping the engine from running until it is issued the correct PIN code. This is done without altering the vehicle, and is largely undetectable by thieves. The unit communicates directly with the ECU through the CAN databus in order to disable the vehicle. This system is very similar to the one that car manufacturers have been using in their cars for many years however, the criminal isn't able to add a key or use key relay technology to bypass it, as they can with factory fitted systems.

A Ghost can be fitted to any van, car, motorhome, caravan or bike with an engine and is compatible with all major brands of vehicles. The same system can be utilized on electric vehicles. It's an excellent alternative to wheel clamps and steering wheel locks.

If the ghost car immobiliser is activated it will disable all buttons on your car and prevent the ignition from being started without the PIN code. This can be done via the Android or Apple mobile app or by entering the code using your key fob. If a code that is incorrectly entered, the app will display an indicator light and the Ghost will not allow the vehicle to start again. This is a great deterrent. in the event that the vehicle cannot be started, the burglar will continue to pursue a new area of.

The Ghost is a small, weatherproof device that can be hidden away in the most inaccessible areas of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also simple to remove if you choose to switch vehicles, or even give it to an auto repair shop or valet parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognised by a few insurance companies. It is also equipped with a secure emergency Pin Code override and features the Service/Valet Mode which can be activated with an app button or by using your key fob.

Disarm

Unlike the mechanical anti-theft devices, which are able to be removed, ghost immobilisers are hidden and are integrated into the car. Even if they were discovered in the car, thieves wouldn't be able to start the vehicle. They are almost impossible to bypass or hack. Ghost immobilisers are able to prevent key cloning and signal jamming and devices spoofing. These are methods that thieves use to gain access into vehicles equipped that have standard immobilisers.

An immobiliser works by sending an electronic code to the ECU (electronic control unit). If a wrong code is sent the vehicle will not be launched as the engine won't start up. It is possible to disable a ghost immobiliser with the aid of a software program, however it is extremely difficult and time-consuming to do so. The software must be installed and operated by a authorised installer.

The Ghost immobiliser, a tiny system, is hidden within the vehicle's wiring loom. It is inaccessible to the naked eye after it has been installed. It won't show up on diagnostic systems, there aren't LED indicators, and it does not communicate with the engine via the OBD port. It communicates without sound through the CAN data circuit.

The system will block the vehicle from starting until it is able to receive a user-defined PIN code sequence. The code is entered by pressing buttons on the steering wheels, door panels, or central console. This is a how much is a ghost immobiliser safer method of protecting your vehicle as it does not require keys or remote control.

In addition to this ghost 2 immobiliser review has the option of a service mode that can be activated by using the application on your mobile phone. This lets you give your keys to someone else to use for valet parking or service without having to enter a disarm sequence.

Whether your Ghost is in service mode or not you should not attempt to remove the system yourself because it could affect your engine and cause damage. It is recommended to contact an TASSA-certified installer who can safely and properly remove the system. Our most recent GHOST immobilisers have a specific fingerprint QR sticker hidden in various parts of your vehicle. These are linked to our security register. If the system is removed and later sold on the blackmarket it will be able to trace the original owner.

Anti-Hijack

Ghost Immobiliser 2 has a highly effective anti-hijack function. This system functions as smart keys and is among the most secure ways to ensure your car is safe from thieves. The Ghost system will automatically turn on the hazard light and stop the car's engine when the ignition is switched on and the vehicle is stationary. This allows the driver or passengers time to press a secret security button (depending on the vehicle) before the system reactivates and the engine is once again allowed to start.

Unlike many competitor systems that simply stall the engine when the ignition is switched on, the Ghost system uses a special controller and timer unit that will shut off the fuel cut-off valve 14 when it is activated after the set time, even when the ignition is switched on! The delay time frame needs to be long enough to allow the owner of the vehicle who was hijacked of the vehicle to drive away from the location of the incident and to maintain a sufficient distance from the stalled vehicle before the system is able to reactivate.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it also comes with an additional security feature that blocks common methods of hacking used to gain access to modern vehicles, such as relay attacks key range extending, key range hacking and ECU swapping. The Ghost system communicates in a silent manner and does not emit signals that can be picked by a thief with RF scanning or code-grabbing technology.

The Ghost system comes with a service / valet mode that allows your car to be temporarily started and driven, without the requirement for a PIN code. This is perfect if you are parking your vehicle and need to leave it for a brief period of time, such as for example, to store groceries in the boot, or open a garage door, etc. The system will end service mode based on speed and time or via the simple PIN code entry process, giving you complete assurance that only YOU are able to use your car!

Keyless Entry

Many customers are looking for extra security measures due to the increasing trend of car thefts using contactless technology. This is particularly relevant for those who have put in time or money into personalising their vehicles and own expensive or rare vehicles. Immobilisers that are added to your vehicle can be an effective way to deter this kind of theft, as they can prevent your car from starting until the correct pin code is entered along with your key fob.

Immobilisers are made to work with various vehicle circuits, including those that control starter motors and fuel pumps. They also are able to shut the car alarm to draw attention to and frighten away any potential thieves.

These devices communicate directly with the engine control unit using the CAN data network. They prevent the thief from bypassing it by installing a replacement ECU or using key programmers. These immobilisers can be fitted discretely inside your vehicle, leaving no traces and are completely undetectable by the tools that hi-tech thieves use.

Unlike other systems that require a specific app, or a tag to be worn on the person of the driver, a Ghost immobiliser is only disarmed by pressing a sequence of the existing electronic buttons on your steering wheel, door panel, and centre console, allowing you to choose a custom pin sequence. The pin can easily be changed, making the device as secure as a bank card. It can also be more difficult to hack because it takes up to 20 presses.

ghost immobiliser for sale also has the Valet/Service mode, which allows you to disable the system when your vehicle will be handed over to valet parking or service which allows it to work within certain guidelines, such as a 30mph speed limit which means you don't need to worry about your car being driven at a reckless speed. The system can be reactivated using the original key or corresponding entry code.

This makes it the most efficient and secure aftermarket CAN immobiliser available on the market, and is insurance approved by Thatcham as an add-on to your vehicle when installed by one of our accredited installers. The Ghost 2 immobiliser comes with six QR fingerprint labels as well as an ISR contact card with your unique QR codes, and an emergency code that is secure. All of these are kept in your wallet or purse.310300814_438157535072560_441431797686435441_nlow.jpg

Tags: