Bennett Macrossan

How to Replace a Kia Sportage Replacement Key

For many Kia Car Keys Replacement models keys, there is an integrated keyless entry system. The key is usually akin to a remote control and can be replaced by a new one purchased from an kia sorento key fob programming dealer or a locksmith.

Key fobs might stop working for several reasons, including the battery of the coin is dead, worn buttons, water damage, signal interference and a faulty receiver module. Here are some tips on how you can get your Kia Sportage replacement kia soul key key back to working.

How do you replace a remote key or smartkey

The battery inside your Kia's smart key will eventually need to be replaced, whether it is a remote key that starts with a push button or a standard metal key that doesn't have an electronic transponder. This is especially true if your car displays a message telling you that the remote or smart keys are in poor condition.

Fortunately, it's an easy process. To replace the battery on the key fob take out the mechanical key from the slit at the back of the key fob and lift the cover. A small screw will be in the key fob, which holds the battery in its place. By using a small screwdriver remove the screw and remove the battery that was in place. Then, you can insert the new battery and close the slit in the key fob.

Test the key fob by pressing the lock or unlock buttons. If the doors unlock and lock exactly as you expect, then you're all set! You can now take advantage of kia forte replacement key's hands-free lock/unlock function when your fingers are cold or you need to make errands in Brandon.

Not all key fobs could need to be programmed (transponder chips or smart keys). This requires a special programming machine that only the dealer or locksmith has access to. Other keys (non-transponder metal keys) don't require programming. If your keys need to be reprogrammed, you will need to be aware of the number stamped on the tag of the key code and save it in a secure location.

How do you replace a battery?

If the Kia key fob does not respond to pressing the lock/unlock button, it's likely that the battery is not fully charged. A battery that is not functioning properly can cause other issues, like the check engine light turning on or the engine not working correctly. It is relatively easy to replace key fob batteries using just two tools.

Be sure to turn off your vehicle and close all doors prior to beginning. Find the small, metal or plastic piece at the bottom of your key fob and gently jiggle it until the metal key is released. This key can be put into the driver door handle to unlock your car.

To replace the battery in the key fob, remove the rear cover. Make use of a plastic pry tool to remove the latch that holds the black negative cable. Remove the old battery and then orient the new battery so that the "+" positive side is facing you, and the "-" negative side is facing towards the fob's metallic electrical contacts. Push the new CR2032 battery straight into position, avoiding excessive force to avoid damaging or breaking the contacts on the metal.

After installing the new battery after which you turn the key fob on and off in the ignition until the door locks up. Then, test your Kia key fob and see if it is working properly again.

How do you replace a smart keys

You may have either an ordinary keyfob or Smart Key depending on the model of Kia Sportage. The difference is that the smart key has an incredibly small key blade hidden within it, whereas the standard fob doesn't. Both kinds of key fobs come with batteries inside that will eventually have to be replaced. It is a simple process that takes less than two minutes.

Before you begin before you begin, make sure that you are on a level surface with sufficient lighting and that your Kia is not on. Be aware that the fob has tiny pieces that could be thrown off when you're not careful.

The small release button is located on the lower backside. It could be a circular silver button or a rectangular slot. Once you press this button, the mechanical blade will pop out and you can then open the key fob.

Once you have the key fob open it is easy to take out the old battery and replace it. The new battery is a C2032, and can be purchased online or in your local auto parts store. Once you're done, your key fob will allow you to lock and unlock your vehicle even if it's not running.

How do I replace a mechanical key

The Kia keyfob is an excellent convenience which allows us to lock or unlock our car by simply pressing a button. Like all devices that is used, the Kia key fob may have issues. Luckily, there are ways to solve these issues and keep our key fobs in good working order in the long run.

One of the most common problems is a low or dead battery. This can cause the fob to stop working altogether or even to stop working intermittently. If this is the case, replace the battery with a new one.

If this isn't enough to solve the problem, use an ordinary screwdriver with a flat head to push the fob's casing made of plastic open. Be sure not to damage any internal components or scratch the plastic. Once the battery is removed and replaced with a brand new battery.

Once the new battery is in, close and open the doors with the mechanical key (every Kia fob has an emergency mechanical key that will fit into the slot). Test the key fob and verify that it's working properly. If the fob isn't working, call a locksmith or dealer to solve the issue. To avoid a lockout in the future ensure you have an emergency key that will be able to work with all trunk and door cylinders.