Alena Humphreys

Making Your Own Replacement Key For Saab 93 Viggen

Saab owners who lose their keys might be concerned about the cost and inconvenience to replace it. You can save the expense by creating your own key fob.

To accomplish this, you'll need an flathead screwdriver. Place the screwdriver flat in the slot that is located in the middle of the case and then slowly lift it.

Cost

Some used cars only have one key, whereas most SAABs come with two keys. In this case, the owner must get an additional key, and it could be costly. There are a variety of ways to save on this process. If you are only looking to replace the key fob case and not the emergency key or badge, you can save some money by purchasing a used case from a dealer. However, be aware that these cases do not contain the badge or key for emergency use and are prone to wearing out quickly.

You must also be able to pay for the installation and programming the TWICE module. These costs can quickly mount up particularly if you have no spare key.

This is why it is essential to have two keys for your car. This way, if lose the only working key you won't end up with no transportation.

The good news is that adding another key to your saab spare key 9-3 isn't as difficult as it might seem. The only problem with this is that the key has to be linked to your car's computer. This can be accomplished by a dealer, however it could take a while to set up an appointment. Luckily, you can locate the information you require online to aid you with the process.

Installation

Most Saab cars built since 1995 have an immobilizer that makes use of keys to control the engine of the car. This system also controls remote and door locks for the vehicle. It is vital to have an extra key in case you lose your original key and having your vehicle stolen. If you lose your only saab ignition key working key, there are many ways to replace it without paying for expensive dealer services.

The first step is to prepare the new key fob. It is done by using a flathead screwdriver to pry the case open. Simply insert the screwdriver into tiny slots in the middle of the case. Then gently work it. If you're having trouble, try using different angles. After you've opened up the case, you're able to take out the electronics and put them in a new fob case.

You can begin the programming process when you have the replacement key and fob. You'll need to connect your Tech2 and then follow the instructions for NG 9-3 with or without transponders. It is recommended to use a replacement unit TWICE that is already connected to the correct transponder and key. You can find the unit online, but you should make sure that the Replacement Saab 9-3 Key is an OEM part.

Programming

Tech 2 Tech 2 is required to add an extra key to the Saab 9-3. It also requires programming the vehicle to recognize the new keys. This is a much more complicated process than simply copying a key made of metal. It must be performed by a professional to avoid damaging the electronic system of the vehicle. If you're thinking about adding a spare key for your car, you should try to do it as quickly as you can. In the event of delay, it could result in higher costs in the future.

In addition to putting in an additional key, you'll also need to replace the TWICE or CIM module. This is typically a mail-order process and isn't something you can get by contacting an aftermarket retailer. Based on the model of your car the price could be quite high.

The dealer will charge you the highest dollars to replace your car computer, but there's another option! S.A. Locksmith & Security can RE-Program the EEPROM in your saab key replacement cost computer and prepare the vehicle for the new key, saving you the cost of a brand-new car computer! This service is quick, easy and inexpensive. It will save you up to 50% or more when compared to what a dealership will charge you! This is a fantastic solution for those who have lost their keys.

Remotes

The saab 9-3 replacement key 9-3 Viggen is one of the most unique vehicles ever to sport the Saab badge. It was an Scandinavian, front-drive, fighter jet-inspired beast that was fast as a nut and fun to drive. While a variety of other saab 900 key models were built after it, they were not as original.

It's important that you replace your Saab 9-3 key fob immediately after you lose it. Saab vehicles come with an immobilizer device that requires a special key for starting. If you have a spare key, the replacement process is fairly easy. However, if you don't have one, it can be costly and time-consuming.

You can save money by purchasing an used replacement key fob, and then having it programmed by a locksmith in your area. You should be cautious when buying used keys from eBay or other online retailers. They might not be authentic and you may pay more at the end.

Anyone can remove the electronic components and battery from an old key fob using a small flathead phillips screwdriver. Be sure not to harm the tiny electronic components inside the case. Avoid pouring liquids into the case as this can cause damage. It is also recommended to avoid purchasing cloned keys from second-hand sellers, since they might not have been connected to the CIM of the car you own.