Entrada del blog por Lavern Holeman

Todo el mundo

BMW Ghost Immobiliser

The Ghost uses the data bus CAN to communicate with your vehicle. This prevents thieves from adding keys or replacing the ECU to get around your security system because it requires a valid PIN code to begin the engine.

The Ghost is unique to other immobilisers in that it doesn't rely on key-fobs or LED indicators. Instead, it uses your vehicle's existing buttons to allow you to select a unique disarm sequence that you only know.

Stop & Start

If you've ever driven a BMW or utilized its stop-start feature, you might have noticed that the engine continues to run for 30 seconds after you release the brake pedal. This is due to the BMW engine management system continuously monitoring your vehicle for an ignition key, and when it is detected, it will continue to run. The autowatch ghost immobiliser 2 Ghost immobiliser prevents this from happening by stopping the car whenever you press a button.

Our BMW ghost immobiliser ghost is a revolutionary next-generation device that doesn't require cutting OEM wires or installing an aftermarket alarms or key fobs. It is connected to the BMW CAN data network and is programmed with an unique PIN code that is accessible through buttons on your car. This lets you enter the key sequences which aren't available in the normal media menus. For example the volume up/down button, or source controls, air conditioning, cruise control, etc. The PIN could be between 4 and 20 numbers, so it is extremely difficult for thieves to figure out or crack.

We can also add to the system the service/valet mode. This mode is activated when your vehicle is being serviced to ensure that the Ghost is hidden from the garage. You can do this by pressing the service button 5 times on your infotainment device (the system will flash with confirmation) and the Ghost will automatically arm itself when you return.

With luxury vehicles being more prone to being targeted than ever before, we strongly recommend the Ghost immobiliser to be fitted. It's completely undetectable, does not require cutting any wiring in the factory and can shut down your car's engine if an incorrect pin code is entered. It is a simple, but effective method to stop your car from being stolen even with a key that is cloned. Check out social media sites to see just how quickly new vehicles are stolen with tools for cloning that are available on the internet for less than PS80.

Service / Valet Mode

The Ghost is a market-leading immobiliser designed to prevent your vehicle from being taken by key cloning and hacking. It works by utilising the factory buttons of your vehicle to create an unique sequence of pushes that only you can identify, much like pin code security on your mobile phone. It's incredibly discreet and quiet, not to mention dissuading even the most determined thieves from ever trying!

When parked at home or in the event of a meet and greet In a meet and greet situation, the Ghost can be put into service mode, which allows you to start your vehicle using your keys as normal but prevents the engine from being started again unless the correct code is entered. This is ideal for customers who must give their vehicles to valet services or trusted family members and friends. It also allows you to take the car to the garage for servicing etc without having to worry about it getting taken away or altered by a mechanic whilst you are waiting.

If the service/valet mode has been activated, your BMW will not be able to drive after it is started. This prevents anyone else from attempting to drive the vehicle while you are away. After you return, the vehicle will be restored to normal operation and stop it from being tampered or stolen again.

We can fit the Ghost to any BMW all you require is the right keys as the device does not use the original remotes, and can be used alongside them. We are TASSA registered, DBS-security screened and fully trained in system installation. You can be confident that the installation will be completed correctly and that your Ghost device will function exactly as it was intended. Your car will also be registered in a database and you will receive a certificate that you can show to your insurance company. they are awestruck by these devices and often receive significant discounts!

We can also supply an optional Bluetooth tag which can be used to disable the Ghost by using an app on your phone (IOS and Android) or in case you don't have an iPhone or aren't happy with it just press the emergency card once. This is an extra cost and requires an additional Bluetooth pairing.

Anti-Hijack

Ghost created this discrete, unobtrusive device to combat the increasing sophistication of hi-tech thieves. It is designed to prevent thieves from acquiring a new key or replacing the ECU to start your vehicle and drive it away. Ghost connects to your CAN data network and uses the buttons on your vehicle (steering wheel and centre console, as well as door panels) to create a unique push sequence that needs to be entered before the engine can be started.

When the anti-hijacking feature is activated the attempt to restart the engine will be blocked. The system will sharpen the horn and flash the indicators. It will also stop the vehicle in the event that the code cannot be found. By entering your push sequence, or entering service mode, you can deactivate the Anti-Hijack function. This allows your vehicle to temporarily start without having to enter the PIN.

If you have an GPS device connected to your BMW it is possible to utilize it to disable the Anti-Hijack function to allow you to use your navigation system when the vehicle is in a parking spot. If you have a smart-phone you can also connect it to your ghost immobiliser Car app to control the anti-hijack feature and other functions.

311170119_2306394586188303_2849487588620745484_nlow.jpgThis product is Tassa-certified and recognized by most insurance companies. It reduces the chances of your pride and Joy being stolen. It is discrete and inconspicuous, it does not affect the functioning of your vehicle or require any special programming skills to set up or operate. It is totally undetectable by tools for detecting that thieves employ and is completely invulnerable to key cloning because it connects directly to your vehicle's CAN data network.

Remote Control

We can connect the Ghost device with your mobile application to allow remote control of keyless start and go functions. This is useful when a valet or mechanic has to start your car and you are else. The system allows you to start the vehicle by selecting drive and then exit the service mode without the need to use your key fobs. You can also view your vehicle in real time on a map on your smartphone, ideal for tracking your car whilst in motion.

The autowatch ghost immobiliser cost can be placed in the dashboard area, or in the center console. It is completely hidden, tamperproof, and does not need any additional wiring. The device is connected to the vehicles CAN Data Network (similar to an Ethernet cable) and a unique PIN code is inserted into it. This pin code needs to be chosen prior to the vehicle's start. This will prevent thieves from gaining access to the system using the cloned or replaced ECU.

If the vehicle is stolen, the Ghost will go into a service mode that disables all functions unless a PIN code is entered, or you use the mobile app to dearm it. This feature was created to safeguard your vehicle from thieves using high-tech devices who utilize relay boxes to take it. This will stop thieves from using their mobile phones to activate your sat-nav or mp3 players to track your vehicle!

Ghost can also prevent 'Relay-style Frequency Amplification'. This is the most common way that a vehicle is being taken away with a key-fob that was copied or stolen through hacking. ghost immobiliser near me enables you to prevent this by installing an anti-theft device in your vehicle, called Secure-A-Key. The device is inserted into the key fob of your vehicle and then disconnects the battery after a couple of inactive minutes. This what is ghost immobiliser possible with most modern PKE keys.

We are TASSA accredited (Tracking and Aftermarket Security Systems Association) A recognized body that a few insurance companies recognise and offer discounts for fitting the device. We are also DBS security screened and fully system-trained to install the Ghost to ensure that all work is completed in the highest quality. Once installed you will receive documentation that you can present to your insurance company as proof of installation which will allow you to get the best deal possible on your car insurance.

Marcas: